Why does the touchless soap dispenser not come out
Release Time:
Nov 02,2022
When we use touchless soap dispensers, we often encounter the situation of no liquid, so what is the reason for no liquid from touchless soap dispensers? Let's take a look.
When we use touchless soap dispensers, we often encounter the situation of no liquid, so what is the reason for no liquid from touchless soap dispensers? Let's take a look.
1. There is no hand sanitizer, just add hand sanitizer.
2. The hand sanitizer is thicker. If the hand sanitizer is too thick, the liquid will not flow smoothly, or the liquid outlet will be blocked and the touchless soap dispenser will not produce the hand sanitizer. You can add an appropriate amount of water into the soap container to dilute the hand sanitizer. Both hand-operated and sensor-operated soap dispensers can be used
3, inferior soap dispenser. Inferior touchless soap dispensers usually have a short service life and have many problems during use, such as some inferior soap liquid sensors, which are not sensitive, and sometimes no liquid is discharged, which affects use; Soap dispensers often get clogged and no hand sanitizer comes out. When purchasing, it is recommended to choose regular channels, try to choose reliable brands, and the quality is guaranteed.
4. Too much air inside. The main way to dispense hand sanitizer from touchless soap dispensers is to press the liquid outlet tube. If there is too much air in the liquid outlet tube, it will be difficult to press out the hand sanitizer. You can take out the pressing tube outside the soap dispenser, then clean up the excess hand sanitizer outside, pour in clean water and press or use the soap dispenser to discharge the air in the liquid outlet tube.
5. The spring is old and broken. In the touchless soap dispenser, the spring in the soap dispenser is used to support the pressing of the hand sanitizer. If the liquid outlet spring in the soap dispenser is old and broken, the hand sanitizer cannot be pressed out. If the spring is broken, replace it with a new one.
Add :No 3-1 Bldg., No 8, Pingxi 7 Rd., Nanping S&T Park, Zhuhai, Guangdong
IDENTIFY ATTENTION
Follow us